- FREE Express Shipping On Orders Rs. 2000.
-21%
3 Axis FPV Camera Brushless Gimbal with Control Board
Original price was: ₹8,729.00.₹6,909.00Current price is: ₹6,909.00.
- Onboard gyroscope and accelerometer (MPU6050), dual gyroscope for more action
- Infrared LED interface, it is more convenient to take pictures remotely
- Futaba S-Bus, supports bus receiver: Spektrum satellite port
- Up to 7-channel PWM/Sum-PPM input/output
- Each axis can be connected to support the analog joystick, which can be used by the SLR handheld gimbal
- With additional I2C port (I2C#2), an external 6050 can be used to replace the on-board sensor and 3 aux ports.
- Supply voltage: 6 – 18 V or 2 – 4S
- Motor drive current: maximum 2A per motor per phase
- Description
- Reviews (0)
Description
3 Axis FPV Camera Brushless Gimbal with Control Board
Using the STM32F103RC at 72 MHz processor, the processing speed is 10 times faster than the 8, the response is faster and more sensitive.
On-board Bluetooth can be installed, and PID parameter adjustment can be performed through the mobile phone, which is much more convenient for outdoor parameter adjustment.
Key Features:
- Shock Resistance: Coming with rubber ball for better shock resistance. it is easy for you to control.
- Power Choosing: It is RTF version. Recommended power supply is 12V(3s battery), and battery is not included.
- Compatible With: It is compatible for 3 / 3+ / 4 camera.
- Aluminium-alloy Structure: With CNC machined aluminium-alloy structure, it is light relatively. Brushless motor drives gimbal directly.
- High Performance: Being equipped with motor is good to heat dissipation. Excellent stability, high technology and superb craftsmanship.
How to install 3 Axis FPV Camera Gimbal:
- Remove damping ball, open the top mounting plate
- The mounting plate with a screw lock in the lower part of the aircraft
- Install vibration ball
- Install cameras, compact cameras with tape state
Application:
- Â GOPRO3/GOPRO4 and series compatible cameras
Package Includes:
- 1 x FPV 3 Axis Brushless CNC Metal Gimbal With Controller
- 1 x Camera fix Strap
- 1 x JST plug / XH-2.54 Plug
- 1 x 5pin cable connector
- 1 x Screw set
Specifications:
| Driver board | STORM32BGC |
| Firmware version | o323bgc-release-v070 |
| Hardware version | V130 |
| Working voltage | Â 3-4S (11.1-16.8V) |
| Working current | 350mA |
| Joystick control angle | PITCH: -25 degrees + 25 degrees / ROLL: -25 degrees + 25 degrees / YAW: -90 degrees + 90 degrees. |
| Switch Control Mode | Lock/Follow |
| Size | 80*80*100mm(L*W*H) |
| Weight | 180g |
| Scope of application | GOPRO series compatible cameras |
| Power Connectors | Â JST and HX |
Reviews
There are no reviews yet.